• Systems

    Systems

    Continuous Insulation (CI)
    CI Enhancements
    Direct Applied
    Panelization
    • Continuous Insulation (CI)

      Dryvit Outsulation - the original continuous insulation (CI). This family of EIFS offered by Dryvit includes: substrate air/moisture protection, drainage for incidental rain penetration, and a durable finish system that can be enhanced to meet your needs - Dryvit Outsulation is a high-performance cladding solution.

    • Outsulation® Plus

      Outsulation Plus® System

    • Outsulation® MD

      Outsulation® MD System

    • Outsulation® PD

      Outsulation PD® System

    • Stratum Guard® I

      Stratum Guard® I System

    • Stratum Guard® II

      Stratum Guard® System II

     
    • CI Enhancements

      Dryvit offers programs to enhance the value of Continuous Insulation (CI)

    • High Durability Continuous Insulation (HDCI™)

      HDCI Program.... High Durability Continuous Insulation

    • ShieldIt™ Program

      Proprietary base coat system that prevents woodpecker damage.

     
    • Direct Applied

      Direct Applied Systems

      In cases where continuous insulation (CI) is not required, Dryvit offers direct applied systems that provide an option for a Dryvit exterior finish system to be applied over exterior cement board with a water-resistive barrier and moisture drainage. This affords the architect the option to choose from traditional or specialty Dryvit finishes like brick, lymestone, granite and even metal panels for the building exterior.

    • TAFS™ I

      TAFS™ I

    • TAFS™ II

      TAFS™ II

     
    • Fedderlite

      Fedderlite

    • Metalite

      Metalite

    • Outsulation® PFP - Steel Stud

      Outsulation® PFP - Steel Stud

     
    Outsulation® Plus

    An Exterior Insulation and Finish System with secondary Water Resistive Barrier, additional Drainage Medium, and an optional Non-Combustible (NC) protective coating.

     
    Outsulation® MD

    A commercial Exterior Insulation and Finish System with a secondary Water Resistive Barrier, optional additional Drainage Medium, 10mm Drainage Cavity and an optional Non-Combustible (NC) protective coating.

     
    Outsulation® PD

    A commercial Exterior Insulation and Finish System with a secondary Water Resistive Barrier, Incidental Drainage Medium, 10mm Drainage Cavity and an optional Non-Combustible (NC) protective coating. Installed by the best of the best Dryvit Listed Applicators.

     
    Stratum Guard® I

    A residential Exterior Insulation and Finish System with Incidental Moisture Drainage and a 10mm Drainage Cavity for use over wood substrates.

     
    Stratum Guard® II

    A residential Exterior Insulation and Finish System with Incidental Moisture Drainage and a 10mm Drainage Cavity for use over wood substrates.

     
    High Durability Continuous Insulation (HDCI™)

    One of Dryvit's most recent innovations, and the most durable CI program available today. Impact resistance is backed by a 20-year performance warranty! If the EIF system is punctured, we will repair it.*

     
    ShieldIt™ Program

    ShieldIt comprises a composite base coat system to ward off the potential damage from woodpeckers and similar pests,for new Dryvit Outsulation and existing EIFS, with a limited 10 year repair warranty available.

     
    TAFS™ I

    High performance finish solutions for stucco, concrete masonry, tilt up, and other compatible substrates.

     
    TAFS™ II

    High performance finish solutions for stucco, concrete masonry, tilt up, and other compatible substrates.

     
    Fedderlite

    The Fedderlite panel assembly utilizes a unique process for embedding reinforcing channels into the CI.

     
    Metalite

    The Metalite panel assembly utilizes a specially designed light gauge metal frame and proprietary metal pan.

     
    Outsulation® PFP - Steel Stud

    The Outsulation® PFP system™ is a high performance Outsulation system over steel studs in a prefabricated panel assembly and delivered to the job site for erection on the wall.

     
  • Products

    Products

    Adhesives/Base Coats
    Coatings
    Finish Enhancements
    Lightweight and Elastomeric Finishes
    Metallic Coatings
    Primers
    Reinforcing Meshes
    Stone, Masonry and Quartz Finishes
    Textured Finishes
    Topcoats and Stains
    Water Resistive Barriers
    Additional Products
    • AP Adhesive™
    • Genesis™
    • Genesis™ DM
    • Genesis™ DMS
    • NCB™
    • Primus®
    • Primus® DM
    • Rapidry DM™ 35-50
    • Rapidry DM™ 50-75
     
    • Demandit™ Smooth
    • Demandit™ Sanded
    • HDP™ Coating
     
     
     
     
    • Weatherprime™
    • Color Prime™
    • Primer with Sand™
     
     
     
    • Freestyle®
    • Quarzputz®
    • Sandblast®
    • Sandpebble™
    • Sandpebble™ Fine
    • NT™ Finishes
    • HDP™ Finish
     
     
     
     
    AP Adhesive™

    One-part, urethane based adhesive

     
    Genesis™

    Acrylic-modified, fibre-reinforced adhesive, base coat and leveling coat

     
    Genesis™ DM

    Dry mix, polymer-modified, cementitious, fibre-reinforced adhesive and base coat

     
    Genesis™ DMS

    Sprayable, dry blend, polymer-modified, cement-based adhesive and base coat

     
    NCB™

    A tintable, non-cementitious base coat for embedding reinforcing mesh, for re-skimming existing lamina during repair and remediation, and providing a grout coat for Custom Brick™ finishes

     
    Primus®

    Acrylic-modified adhesive and base coat

     
    Primus® DM

    Dry mix, polymer-modified, cementitious adhesive and base coat

     
    Rapidry DM™ 35-50

    Fast-setting, dry mix, polymer-modified, cementitious adhesive and base coat for use in colder weather.

     
    Rapidry DM™ 50-75

    Fast-setting, dry mix, polymer-modified, cementitious adhesive and base coat

     
    Demandit™ Smooth

    Exterior/Interior Acrylic PMR™ Architectural Coating

     
    Demandit™ Sanded

    Exterior/Interior Acrylic PMR™ Architectural Coating

     
    HDP™ Coating

    Exterior Acrylic Coating with Hydrophobic Properties

     
    PMR™ - Proven Mildew Resistance

    Proven mildew resistant finishes and coatings for demanding building environments

     
    StratoTone™

    The latest technology in environmentally friendly and fade resistant StratoTone™ High Performance Colourants

     
    E™ Finishes

    Aggregate textured 100% acrylic-based Dirt Pickup Resistance lightweight finishes

     
    Weatherlastic™ Smooth

    Flexible, waterproof elastomeric exterior coating

     
    Weatherlastic™ Textured Finishes

    Flexible, elastomeric exterior finishes.

     
    Weathercoat™

    High Performance Acrylic Weatherproofing Coating

     
    Reflectit™

    100% Acrylic coating providing a pearlescent appearance.

     
    Skimit™

    Ready-To-Use Smoothing Material for Dryvit® Base Coat.

     
    Weatherprime™

    Colour-tinted acrylic primer for Weatherlastic™ finishes.

     
    Color Prime™

    Pigmented Acrylic Primer for Dryvit® Finishes

     
    Primer with Sand™

    Acrylic-based Primer with Sand

     
    Reinforcing Mesh

    Glass Fibre Mesh for Reinforcing Dryvit® Base Coats.

     
    Custom Brick™

    Brick made energy Efficient

     
    TerraNeo™

    100% Acrylic-Based Finish with Large Mica Chips and Multi-Colour Quartz Aggregates

     
    Lymestone™

    Limestone made lightweight, durable, affordable and energy efficient

     
    Ameristone™

    100% Acrylic-Based Finish with Multi-Coloured Quartz Aggregates.

     
    Stone Mist™

    Exterior and Interior Quartz Aggregate Finish

     
    Freestyle®

    "Original" Aggregate textured 100% Acrylic-Based Dirt Pickup Resistance Finish

     
    Quarzputz®

    "Original" Aggregate textured 100% Acrylic-Based Dirt Pickup Resistance Finish

     
    Sandblast®

    "Original" Aggregate textured 100% Acrylic-Based Dirt Pickup Resistance Finish

     
    Sandpebble™

    "Original" Aggregate textured 100% Acrylic-Based Dirt Pickup Resistance Finish

     
    Sandpebble™ Fine

    "Original" Aggregate textured 100% Acrylic-Based Dirt Pickup Resistance Finish

     
    NT™ Finishes

    Aggregate Textured 100% Acrylic-Based Dirt Pickup Resistance Finishes, with Improved Application Characteristics

     
    HDP™ Finish

    Textured 100% Acrylic Finishes with Hydrophobic Properties

     
    Tuscan Glaze™

    100% Acrylic custom antique stain.

     
    SealClear™

    Clear Acrylic Primer-Sealer

     
    Backstop™ NT-Texture

    A high performance, non-cementitious water-resistive membrane and air barrier.

     
    Backstop™ NT-VB

    A high performance, non-cementitious water-resistive membrane and air/vapour barrier.

     
    Dryflex™

    A polymer-based, water resistant base coat and adhesive

     
    AquaFlash™ Flashing System

    A liquid-applied flashing material and mesh for sealing rough openings at windows, doors and other wall penetrations.

     
    AC-100™

    An Acrylic Admixture for Portland Cement Mixes

     
    EPS Insulation Board

    Expanded Polystyrene Insulation Board for use in Dryvit Systems

     
    RapidPatch™

    Fast-setting, non-sagging, patching material.

     

Stone Mist

Stone Mist

EXTERIOR AND INTERIOR QUARTZ AGGREGATE FINISH - Stone Mist is a natural finish that accents the environment in subtle tones and enhances any exterior or interior wall.  Special aggregates pick up the natural sunlight reflecting the glitter and beauty of only the rarest of stones.

Sm 101 Med
101 SM

Castle Gray

Sm 102 Med
102 SM

Wedgwood Gray

Sm 103 Med
103 SM

Moon Glow

Sm 104 Med
104 SM

Desert

Sm 105 Med
105 SM

Cinnamon Toast

Sm 106 Med
106 SM

Winter Moon

Sm 107 Med
107 SM

Stone Mountain

Sm 108 Med
108 SM

Morning Fog

Sm 109 Med
109 SM

Golden Sunrise

Sm 110 Med
110 SM

Canyon Valley


Before Making A Final Colour Selection

Please note that the on-screen colours may not precisely match actual colours due to variance in monitor calibrations. It is the intent and purpose of this web-based colour chart to provide a basic representation of Dryvit Systems finish colours and is offered as a sales aid only to select a range of colours for final selection. This web-based colour chart shall not be used for final colour selection as colour differences may occur from one computer to another. Actual colour selection should be made from 8" x 10" samples of each finish type, texture and colour to be used on the project. Samples shall be prepared using the same tools and techniques proposed for the actual installation by the applicator/contractor.

STONE MIST for a natural looking, durable stone finish.

Stone Mist is a coloured quartz aggregate finish premixed in an acrylic binder, which provides a natural stone look to both exterior and interior walls. Whether you are striving to create a solid, upscale appearance for an exterior or a unique and durable finish for an interior, Stone Mist will enhance a building's value by adding both style and substance to it.

Dryvit has developed the technology to make Stone Mist highly resistant to airborne pollutants, acid rain, UV radiation, fungus and mildew. The high-performance finish will remain clean and bright for years with only periodic, routine maintenance. Like all Dryvit finishes, Stone Mist is highly versatile. Use it as a finish for any Dryvit system or directly applied to properly prepared substrates such as masonry, stucco or interior drywall.

These textures are trowel applied as is typical for interior usage. For exterior applications, we recommend a tight-trowel coat followed by a spray coat to achieve the desired texture.

The Stone Mist look is sophisticated. It is a natural stone finish, which can be used to blend with or highlight the surrounding environment as well as other materials used on the job. Call Dryvit today and find out how Stone Mist can work for you on your next project!


Join Our Mailing List


  • 800-263-3308
  • 129 Ringwood Drive
  • Stouffville, ON L4A 8C1

© 2016 Dryvit Systems Canada